imad
12-18-2010, 11:39 AM
SECOND HAND UTECO MACHINE
ONYX 876 GEARLESS MOD. 140
S/N 1893
TECHNICAL FEATURES
MANUFACTURING YEAR: 2004
NUMBER OF PRINTING STATIONS: 8
PRINTING POSSIBILITIES: 8+0, 8+8 half web (turning bar included)
MATERIAL WIDTH: max. 1450 mm.
PRINTING WIDTH: max. 1400 mm.
PRINTING REPEAT: min. 380 mm. – max. 800 mm.
MECHANICAL SPEED: 300 m/min max.
MATERIALS ORIGINALLY
PRINTED: LDPE, HDPE, PP, PET
TENSION RANGE : 2 ÷ 32 kg
TYPE OF INK USED: solvent based inks
TOTAL PLATE THICKNESS: 1,14 + 0.55 mm including double sticky back
MACHINE VOLTAGE: 380 Volts
MAIN LINE FREQUENCY: 50 Hz
AUXILIARY VOLTAGE: 115 Volts
COLOUR OF THE MACHINE: White Ral 7035 + Blu RAL 5015
WEB THREADING: P6781
AUTOMATIC TURRET UNWINDER TYPE TA-U 1000
Outside reel diameter 1000 mm.
Cut-off unit for the automatic flying splice at production speed.
Synchronised reel change between the unwinder and rewinder.
Nr. 2 pneumatic expanding air shafts, i.d. 76 mm.
PRINTING GROUP
Hastalloy surface of the C.I. drum, o.d. 1790 mm.
Motorised longitudinal register control.
Motorised side register control.
C.I. drum thermoregulating unit.
Air cooled water thermoregulationg unit. It is a closed loop system with recirculating
pump and heat exchanger; the unit comes with an electrical heater for water preheating
and has a cooling capacity of approximately 29.000 refrigerating units/h.
Automatic pre-register (gearless).
Register control type Grafikontrol.
DRYING SECTION
Between colour drying boxes.
Drying tunnel.
Nr. 2 gas heaters, 150.000 K/cal each , complete of thermoregulating units and
motorised air recirculating systems.
OUT-FEED UNIT
Nr. 1 cooling and feed chill roll, 350 mm diameter.
Pneumatic dancing roller for web tension control on the unwinder.
Pneumatic dancing roller for web tension control on the rewinder.
AUTOMATIC TURRET REWINDER TA-R 1000
Outside reel diameter 1000 mm.
Cut-off unit for the automatic flying splice at production speed.
Nr. 2 pneumatic expanding air shafts, i.d. 76 mm.
ANCILLARY EQUIPMENT SUPPLIED WITH THE MACHINE
BST edge guide at press infeed (Kamberoller).
BST edge guide at press outfeed (OPG).
Nr. 8 closed chamber doctor blades, teflon coated
Nr. 2 spare closed chamber doctor blades
Nr. 8 ink trays
Nr. 2 spare ink trays
Turning bar, 8+8 (48%)
VIDEOCAMERA brand "BST"
Nr. 8 viscosity controls brand Fasnacht
Nr. 80 (eighty) printing sleeves, Rotec and Rossini
Nr. 12 (twelve) ceramic anilox sleeves, Simec and Praxair
Nr. 8 (eight) carriers, Rotec and Rossini
ONYX 876 GEARLESS MOD. 140
S/N 1893
TECHNICAL FEATURES
MANUFACTURING YEAR: 2004
NUMBER OF PRINTING STATIONS: 8
PRINTING POSSIBILITIES: 8+0, 8+8 half web (turning bar included)
MATERIAL WIDTH: max. 1450 mm.
PRINTING WIDTH: max. 1400 mm.
PRINTING REPEAT: min. 380 mm. – max. 800 mm.
MECHANICAL SPEED: 300 m/min max.
MATERIALS ORIGINALLY
PRINTED: LDPE, HDPE, PP, PET
TENSION RANGE : 2 ÷ 32 kg
TYPE OF INK USED: solvent based inks
TOTAL PLATE THICKNESS: 1,14 + 0.55 mm including double sticky back
MACHINE VOLTAGE: 380 Volts
MAIN LINE FREQUENCY: 50 Hz
AUXILIARY VOLTAGE: 115 Volts
COLOUR OF THE MACHINE: White Ral 7035 + Blu RAL 5015
WEB THREADING: P6781
AUTOMATIC TURRET UNWINDER TYPE TA-U 1000
Outside reel diameter 1000 mm.
Cut-off unit for the automatic flying splice at production speed.
Synchronised reel change between the unwinder and rewinder.
Nr. 2 pneumatic expanding air shafts, i.d. 76 mm.
PRINTING GROUP
Hastalloy surface of the C.I. drum, o.d. 1790 mm.
Motorised longitudinal register control.
Motorised side register control.
C.I. drum thermoregulating unit.
Air cooled water thermoregulationg unit. It is a closed loop system with recirculating
pump and heat exchanger; the unit comes with an electrical heater for water preheating
and has a cooling capacity of approximately 29.000 refrigerating units/h.
Automatic pre-register (gearless).
Register control type Grafikontrol.
DRYING SECTION
Between colour drying boxes.
Drying tunnel.
Nr. 2 gas heaters, 150.000 K/cal each , complete of thermoregulating units and
motorised air recirculating systems.
OUT-FEED UNIT
Nr. 1 cooling and feed chill roll, 350 mm diameter.
Pneumatic dancing roller for web tension control on the unwinder.
Pneumatic dancing roller for web tension control on the rewinder.
AUTOMATIC TURRET REWINDER TA-R 1000
Outside reel diameter 1000 mm.
Cut-off unit for the automatic flying splice at production speed.
Nr. 2 pneumatic expanding air shafts, i.d. 76 mm.
ANCILLARY EQUIPMENT SUPPLIED WITH THE MACHINE
BST edge guide at press infeed (Kamberoller).
BST edge guide at press outfeed (OPG).
Nr. 8 closed chamber doctor blades, teflon coated
Nr. 2 spare closed chamber doctor blades
Nr. 8 ink trays
Nr. 2 spare ink trays
Turning bar, 8+8 (48%)
VIDEOCAMERA brand "BST"
Nr. 8 viscosity controls brand Fasnacht
Nr. 80 (eighty) printing sleeves, Rotec and Rossini
Nr. 12 (twelve) ceramic anilox sleeves, Simec and Praxair
Nr. 8 (eight) carriers, Rotec and Rossini